Toggle Clamp with Cotter Pin <br> Fits: NW10 & NW16 <br> NW16-075-CTP

NW16-075-CTP
NW16 (KF16) Toggle Clamp with Cotter Pin
NW10 (KF10) Toggle Clamp with Cotter Pin
• Aluminum Body, 304 Stainless Pin and Spring Seat
• Cotter Pin can be used to prevent accidental opening
• Provides quick mounting and uninstall.
• Self-adjusting clamp without manual over tightening
• NW Series (KF, QF)
• High Vacuum Clamps

Also Fits NW10 (KF10, QF10)

NW (KF) High Vacuum Hardware
• Fits KF, NW, QF Series Flanges & Fittings
• Fits Kwik-Flange, Quick Flanges & Fittings
• Quick Clamp

NW10 Flange OD: Ø1.18"
• NW10 Tube OD: 0.50" (Typical)
• NW10 Centering Ring Counter Bore: 0.48"

NW10 High Vacuum Flange Equivalents
KF10, KF-10, K050, NW-10, QF10, ISO-QF, Klamp

NW16 Flange OD: Ø1.18"
• NW16 Tube OD: 0.75" (Typical)
• NW16 Centering Ring Counter Bore: 0.68"

NW16 High Vacuum Flange Equivalents
KF16, KF-16, K075, NW-16, QF16, ISO-QF
NW16-075-CTP Compare to: NW16-CTP-PK10 100318801 P101638 QF16-075-TCL



All NW16 Hardware		All NW10 Hardware



Purchase 10 Pack		NW10 & NW16 Clamps (All Types)

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Images Shown May Be For Reference Only
There is a global helium shortage. Each time an MRI is performed, helium is used. Please rethink your helium balloon purchase.