CNC Machined Clamp <br> Fits: NW10 & NW16 <br> (NW16-C-PK10)

NW16 CNC Machined Clamp
Aluminum
***PACK OF 10***
3 lbs.

NW16-C-PK10
(10) CNC Machine Clamps (Aluminum)
Fits: NW16, NW10 (KF16, KF10)
Fits: 0.50" or 0.75" Tube OD
• High Vacuum Clamp
• Uses Standard NW (KF) seal assembly
• A: 1.94"
• B: 0.63"
• 1/4-20 Thread Size
• MAX PSI: 300

Fits Both NW10 & NW16 Series Flanges
(KF10 & KF16)

NW10 Flange OD: Ø1.18"
• NW10 Tube OD: 0.50" (Typical)
• NW10 Centering Ring Counter Bore: 0.48"

NW10 High Vacuum Flange Equivalents
KF10, KF-10, K050, NW-10, QF10, ISO-QF, Klamp

NW16 Flange OD: Ø1.18"
• NW16 Tube OD: 0.75" (Typical)
• NW16 Centering Ring Counter Bore: 0.68"

NW16 High Vacuum Flange Equivalents
KF16, KF-16, K075, NW-16, QF16, ISO-QF

PK10 Includes (10) NW16-075-C Clamps
NW16-075-C-PK10 NW10-050-C NW10-C-PK10



Need just one?		NW10 & NW16 Clamps (All Types)



All NW10 Hardware		All NW16 Hardware



NW10 Centering Rings		NW16 Centering Rings



Adaptive Centering Rings (NW16 to NW10)

CNC Machine Clamp
• 6016 T6 Aluminum High Vacuum Clamp
• NW, KF, QF Series Clamps
• SS pins and stud
• Integral handle lock helps prevent accidental opening
• Aluminum bar machined for extra strength and durability

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.