Click to enlarge

Ion Gauge Tube, NW40 (KF40)
Platinum Coated, Standard Range

GK-IR-NW40-PC
Replacement Ion (Hot Filament) Gauge Tube
Glass Bayard-Alpert Type Ionization Vacuum Gauge
Hot Cathode Ion Gauge Tube
Standard Range
NW40 (KF40) Port OD: Ø2.18"

• Platinum Coating
• Iridium Filament (Single)

Former LDS PN: 1050-1020-PC-SR-NW40
Varian Equivalent: K2466311 (0563-K2466311)

563 Series Equivalent ionization gauge tube with thoria-coated iridium filament, NW40 KF40

Equivalents: 0563-K2466-311, 563-K2466311


NW40 Platinum Coated
Ion Gauge Tube
GK-IR-NW40-PC

GK-IR-NW40-PC$359.00

Click to enlarge
Click to enlarge
View All Ion Gauge Tubes


NW40 (KF40) UHV Conversion Hardware



Single Ion Calibration

Operating at a pressure below 10-8?
Viton O-Ring Sealed compression ports limit the system pressure because of leakage and permeation.
Use Conflat Flanges & Copper Gaskets Instead!

Click Here To Change Port To Conflat Flange

STANDARD RANGE ION GAUGES:
• Operating Pressure: 2x10-10 torr to 1x10-3 torr
• X-ray Limit: 2x10-10 torr
• Sensitivity: 10 torr-1

PLATINUM COATING
Shields the gauge elements from electrostatic charges at low pressures and drains off the static charges that can build up at high pressures.

Kovar metal tubulation with a graded seal stronger tubulation.

NW40 Flange OD: 2.18"

***NW40 Flange Accessories Available Below***
NW40 Centering Rings
NW40 Clamps, All Types
NW40 Plastic Caps

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company.
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.