Click to enlarge

600 Conflat Flange Series Viton® Gaskets (1) Viton® Gasket For Use With 6.00" OD Conflat Flange 4.51" ID Gasket Torque Max: 7-10 ft-lb

600-VG
• (1) Viton Gasket
Fits ALL 6.00" OD Conflat Flanges (600 CF)

6" Conflat Flange Viton Gaskets
6.00" OD Conflat Flange Viton Gasket
Fluorocarbon, FKM, Viton Gaskets
Fits 6.00" OD Conflat Flanges Only (CF 600)
• Reusable
• High Vacuum Rating: 1x10-8 torr (approx)
• Temperature Range: -70°C up to 50°C
• Intermittent use to 200°C
• Torque Max: 7-10 ft-lb

6" OD Conflat Flange (CF) Equivalents:
• CF100, CF600, DN100CF, NW100CF, 600CF
Compare to: GA-0600V FG0600VU G-600V P104345 0604006 191014 VZVIT100


600 Conflat Flange Series Viton Gasket
(600-VG)
600-VGPrice: $45.54Sale: $16.00

Click to enlarge6.00" OD Conflat Series Hardware

Viton® (Fluorocarbon, FKM) Gaskets may require slight stretching to fit in the Conflat Flange CF groove. Also, it is recommended to use a small amount of vacuum grease to help keep the O'Ring in place.

Operating at a pressure below 10-8?
Viton O Ring sealed compression ports limit the system pressure because of leakage and permeation.
In this case, use CF Copper Gaskets instead!

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers