12-Point Bolt Kit <br>Plate-Nuts & Washers <br>Fits: 4.62" OD Conflat <br> Clearance (Thru) Hole <br> (462-PNK-12)

462-PNK-12
Fits: 4-5/8" OD CF Conflat Flanges With Thru Hole
5 Plate-Nuts, 10 Bolts & Washers Kit
• Weight: 1 lbs
• 12-PT Bolt, Washer and Plate Nut Kit
• Del Seal Conflat Flange (CF) Equivalent
• 18-8 Stainless 12 Point Bolts
• DN75CF (4.62") Clearance Hole Bolt Kit
• Ultra-High Vacuum (UHV) Hardware

462-PNK12 Series Bolt Kit Fits:
4.625" OD Non-Rotatable Thru Hole CF Flanges
4.625" OD Rotatable Thru Hole CF Flanges

Also Fits All CF Elbows, Tees and Crosses

Plate Nuts allow two adjacent bolts to be coupled to a single nut piece. A must for areas where accessibility is limited and reduced access does not allow enough clearance for tools.

Maximum Torque for Vacuum Tight Seals

3.38" -16.50" OD

26 ft/lbs.

Over-torqueing can result in broken bolts



4.62" OD Conflat Series Hardware		4.62" OD Conflat Series, Plate-Nuts



12-Point Wrench		Anti-Seize Stick



4.62" OD Conflat Rotatable THRU Hole Series		4.62" OD Conflat Non-Rotatable THRU Hole Series

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Images Shown May Be For Reference Only
There is a global helium shortage. Each time an MRI is performed, helium is used. Please rethink your helium balloon purchase.