Click to enlarge(1) Viton® Gasket For Use With 3.38" OD Conflat Flange

Part Number: 338-VG
• (1) Viton Gasket
Fits ALL 3.38" OD Conflat Flanges (338 CF)

Conflat Flange Viton Gasket (Fluorocarbon, FKM)
3.38" OD Conflat Flange Viton Gasket
Fluorocarbon, FKM, Viton Gaskets
Fits 3.38" OD Conflat Flanges Only (CF 338)
• Reusable
• High Vacuum Rating: 1x10-8 torr (approx)
• Temperature Range: -70°C up to 50°C
• Intermittent use to 200°C
• Torque Max: 7-10 ft-lb

3.38" OD Conflat Flange (CF) Equivalents:
• 338CF, CF338, DN50CF, NW50CF, 3-3/8" CFF
338-VG Compare to: FG0338VU 0604003 G-338V GA-0337V P104342 100889023 191008


338 Conflat Flange Series Viton Gasket
(338-VG)
338-VGPrice: $26.01Sale: $15.00

Click to enlargeShop all 3.38" OD Conflat Hardware

Viton® (Fluorocarbon, FKM) Gaskets may require slight stretching to fit in the Conflat Flange CF groove. Also, it is recommended to use a small amount of vacuum grease to help keep the O'Ring in place.

Operating at a pressure below 10-8?
Viton O Ring sealed compression ports limit the system pressure because of leakage and permeation.
In this case, use CF Copper Gaskets instead!

Contact LDS Vacuum with any questions:
Phone (407)862-4643 via Fax (407)862-8723 or
info@ldsvacuum.com

LDS Vacuum Products is a 100% woman owned company and
certified Woman Owned Small Business (WOSB)
The logos and/or trademarks appearing on this page are not owned by or registered to LDS but, rather, designate products sold by LDS, and are owned and/or registered to the manufacturers or suppliers of the products.
Viton® is a registered trademark of DuPont Dow Elastomers